DOLMAR Power Products Announce Recall of Chain Saws

Name of Product: DOLMAR chain saws

Units: About 1,300 units

Distributor: DOLMAR Power Products, of Duluth, Ga.

Hazard: The flywheels on some of the chain saws may come apart during use, which could cause serious personal injury.

Description: The recall involves DOLMAR PS6400 and PS7900-model chain saws in which the last five digits of the serial numbers are within the following ranges:

Chain saw Model	Serial Number Range
PS6400	71998 through 79250
PS7900	40156 through 43009

The chain saw’s housing is “warm red” with “DOLMAR” written on it. The chain saw’s serial number can be found on the right hand side of the silver nameplate which is located on the back of the fuel tank. No other DOLMAR chain saws are involved in the recall. Any PS6400 or PS7900 chain saws with the letter “N” preceding the serial number on the nameplate and a blue dot on the shipping carton have been repaired and are not involved in the recall.

Sold at: Outdoor power equipment distributors and industrial suppliers nationwide sold these chain saws from October 2004 through August 2005 for between $570 and $750.

Manufactured in: Germany

Remedy: Consumers should stop using these chain saws immediately and contact DOLMAR to arrange for a free repair. Known purchasers were sent direct mail notification of this recall.

Consumer Contact: For more information, call DOLMAR toll-free at (888) 673-7278 between 8 a.m. and 4:30 p.m. ET Monday through Friday, or visit their Web site at http://www.dolmarusa.com/563.php