Makita U.S.A. Inc. Announces Recall of Chain Saws
Name of Product: Makita Chain Saws
Units: About 3,400 units
Distributor: Makita U.S.A. Inc., of La Mirada, Calif.
Hazard: The flywheels on some of the chain saws can come apart during use, which could cause serious personal injury.
Description: The recall involves Makita DCS6401 and DCS7901-model
chain saws in which the last five digits of the serial numbers are within the
following ranges:
Chain saw Model | Serial Number Range |
---|---|
DCS6401 | 41915
through 45612 81722 through 82057 |
DCS7901 | 31182 through 31491 |
The chain saw’s housing is teal with the name “Makita” written on it. The chain saw’s serial number can be found on the right hand side of the silver nameplate which is located on the back of the fuel tank. No other Makita chain saws are involved in the recall. Any DCS6401 or DCS7901 chain saws with the letter “N” preceding the serial number on the nameplate and a blue dot on the shipping carton have been repaired and are not involved in the recall.
Sold at: Outdoor power equipment distributors and industrial contractor supply houses nationwide sold these chain saws from October 2004 through August 2005 for between $520 and $730.
Manufactured in: Germany
Remedy: Consumers should stop using these recalled chain saws immediately and contact Makita to arrange for a free repair. Known purchasers were sent direct mail notification of this recall.
Consumer Contact: For more information, call Makita toll-free at (866)
714-3860, Ext.232 between 8 a.m. and 4:30 p.m. ET Monday through Friday, or
visit their Web site at www.makitatools.com